Opticlimate Problems and Solutions For Your Best Machine

Opticlimate Problems and Solutions

If you have a Pro 3 15000 and want to use it to cool down 24 x 600w lights, there are a few common Opticlimate problems to look for. You may be able to reduce the number of lights that you’ll need to use it to cool by changing the settings or adding ballasts, but if you have additional heat sources in your studio, you should consider installing the ballasts in another area of the building.

If you’re concerned about heat transfer from your light fixtures, you can install a plenum box on top of the grow room to draw in hot air. If your grow room is not airtight, you may want to mount the opticlimate close to the floor so that it takes in hot air. It will treat that air and expel it at the perfect temperature and humidity. This is an effective solution to reduce heat loss.

Another important feature of the Opticlimate is its ability to cool two rooms simultaneously. It comes with a 3-way valve and extra temperature sensors that will check the day room and night room at the same time. This means that you won’t need two separate large extractors and fan controllers. The pre-heat function prevents condensation on your crop and increases photosynthesis during the start of the day. The Slow Cooldown feature will prevent guttation and minimise mould growth.

Opticlimate Problems and Solutions For Your Best Machine

To install this system, you will need a cold water supply for the unit to operate. The unit consumes between five and nine litres of water per minute, so it will need to be plumbed in before use. The installation is relatively simple, but you will need to know how to program the unit properly. Once you’ve done that, you can proceed with installing your new system. You can also ask Opticlimate for sale if you can install it yourself.

You should also know that the Opticlimate uses up to five to nine litres of water per minute. You should also ensure that your system is plumbed properly before putting it to use. Installation of an Opticlimate is not particularly difficult, but you should have the required skills and knowledge to ensure a successful installation. This article will focus on common Opticlimate problems and solutions. If you have any problems or concerns, please get in touch with our service department so that we can help you.

To use OptiClimate, you’ll need to purchase a system with a mounting plate. The plate is intended to be mounted on the top of the grow room, away from the lighting. It will then absorb hot air and treat it for the right humidity and temperature. Depending on your room’s configuration, this can be mounted on a raised surface or suspended from the ceiling. Afterwards, you’ll need to follow the manual to install the unit.

Website design By BotEap.com

Add a Comment

Your email address will not be published. Required fields are marked *