Reattaching the bathroom tiles can save you a lot of money and make your shower look brand new again

Mold, mildew and dirt. We’ve all seen it on our shower tiles at some point or another.

When bleach or grout cleaner doesn’t work, most people panic and some may think about ripping everything out and replacing the tile and tub.

The answer is to hire a rerouting service. Re-routers can make your shower look brand new again at a fraction of the price it would cost to replace everything.

By using an oscillating tool and carbide blade, a good grind can be achieved in 5-6 hours.

First, the technician will cut all the moldy sealant from the shower tray or tub. The caulk will then be removed from the corners. At this point, we are ready for the hardest part of the job, and that is grinding up most of the old grout. Once all the dust and loose grout has been vacuumed up, the new grout is ready to be installed. Two good rinses to remove any haze from the grout, and now we are ready for a new bead of silicone along the corners and joints of the base.

A grout sealer can be applied 5-7 days later and now you are ready to enjoy your new shower and all of this can be achieved for around $ 500- $ 700.

Areas suitable for rerouting

Rerouting is suitable for a variety of tiled areas, including but not limited to the following: –

Showers

Bathrooms

Kitchen backsplashes

Floors

Balconies / patios

home

Why perform rerouting: rerouting benefits

Price: Your tiled areas can look “like new” for a fraction of the cost of refitting or completely renovating. Complete reuse / renewal which generally includes the following costs:

The new mosaics themselves

Removal and disposal of old tiles

Charge for laying and grouting the new tiles

And in the bathroom, possibly too

Plumbing

Waterproofing

Replacement fixtures and fittings (faucets, toilet, bath, vanity, shower screen, towel rails)

Timing: entry, exit, and completion within a day or two rather than coordinating plumbers and tilers and other tradesmen on multiple visits.

Convenience – Rerouting can generally be accomplished with much less downtime than restocking or a full refurbishment.

Environment – In today’s throwaway society, why remove and replace a structurally sound tile area to end up in a landfill? A simple makeover will make it look brand new! ¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿What ¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿

Rerouting is a ‘green’ solution, saving carbon emissions compared to replacing tiles. Replacing / re-chipping is a poor option in an age when conservation is a concern. Do your bit to help save the environment.

Increase the value of your property – A well presented property can add thousands of $$ to the sale price, sell faster and attract a wider range of buyers. Aside from the kitchen, which most buyers consider the most important room in the house, the bathrooms are considered a key selling point. It makes sense to spend a fraction of the sales price to ensure your home shows up and shows its full potential.

Rental Property – A well presented property will attract tenants, may justify a higher rent, and usually rents faster. An investment property is usually one of your most important assets. It makes sense to spend a fraction of its value to keep the property in good repair and prevent long-term problems from developing.

General rerouting: frequently asked questions

Can wall and floor tiles be rectified?

Yes, but not all tiles are suitable for rerouting. As a guide, the tiles should be 4 inches square. We cannot rule out Mozaic mosaics or mosaics of unusual shapes (i.e. round, hexagonal, octagonal, etc.).

Is the use of grout colors other than white returning?

Yes, there are a variety of grout colors to choose from.

Should I repent or testify again?

Return when:

Your grout is moldy / discolored / cracked.

tiles are at least 4 inches square.

the tiles themselves are in good condition.

you are happy with the color of the tiles.

budget / time dictates.

Remove when:

budget is not a problem.

time or inconvenience is not an issue.

tiles are too small or not suitable for rerouting.

you are not happy with the color of the tiles.

the tiles have been previously resurfaced.

What kind of mosaics can you re-set?

Ceramic, vitrified, porcelain, marble, limestone, granite, to name a few.

Is there a reason why my tokens cannot be reordered?

If there are too many loose / cracked or broken tiles.

If the tiles are less than 4 inches square.

If cement or epoxy grout has previously been used.

If the tiles have been previously resurfaced.

Shower / Restroom Routing – Frequently Asked Questions

Can’t you just clean my shower to get rid of mold?

No, once the mold has penetrated the grout, the only way to get rid of it is to remove the existing grout and then replace it. All the cleaning in the world will only remove mold from the surface of the grout and the mold will simply re-develop from the inside out. Also, cleaning the grout with harsh chemicals and cleaners like bleach actually breaks down the grout over time, making the grout more porous and encouraging more mold growth.

Will sealing the grout in my shower stop mold growth?

The short answer is No. Sealing your grout will help protect the grout and also make it easier to clean, but it doesn’t change the environment. A shower / bath is obviously a humid area, with high humidity levels, the perfect environment for mold to flourish. The best steps you can take to extend the life of your grout and prevent mold build-up are to use a quality grout with an anti-mold additive, seal the new grout, keep the area as well ventilated as possible, and avoid the use of chemicals. and cleaners.

Why do I have to leave the shower dry before re-routing and for how long?

On average, you will be asked to leave the shower dry for 24 hours before and after re-routing. It is important that the shower is left dry to ensure the best possible results. Too much moisture in the shower can lead to a condition known as bleeding that can lead to discoloration of the new grout.

Website design By BotEap.com

Add a Comment

Your email address will not be published. Required fields are marked *