Water Damaged Venetian Plaster

If you have detected a problem with wet Venetian plaster, you will first need to locate where the water is coming from. This is because while it would be easier to fix the wet plaster problem, if you can’t find the source of the water, the problem will come back. Therefore, you need to locate where the water is coming from and repair it before you can move on to plaster damage.

Why a leak might have occurred

If you’re having trouble finding the source of the leak, here are the most common places where leaks tend to occur. For example, plumbing leaks are quite common and obviously need to be repaired by a professional. It may be that the pipes have burst and need fixing. Whatever it is, get a professional right away and that will fix the leak.

Another type of leak that is quite common is a roof leak. This is especially true if you have an older home, as the roof will weaken over time. In this type of damage, it is the ceiling that suffers the most and usually presents damage due to paint detachment or collapse of the ceiling.

If you notice water coming through the walls, there is a good chance it will travel to the exterior masonry wall. Basically, an exterior masonry wall is made of brick or stone and water can get through the plaster layer and the paint is likely to bubble. The coating layer may also start to loosen and the plaster will become dusty.

Finally, the cause of the leak could also be a faulty rain gutter. If there is a problem with the gutter, you will notice a leak around windows or in wood-framed walls. It can cause problems like peeling paint or stains and will need to be addressed immediately.

Once you know what the problem is, it’s time to understand how to prevent the problem from happening again and focus on fixing the cast. You will need drywall compound and drywall tape. If you use drywall mud, you’ll find it really useful for filling gaps, and as long as you smooth it out afterward, it’ll give great results.

Finally, if you have any stains or scratches, all you have to do is wire brush the area and then wipe it clean with a damp cloth. Be sure to remove all flaking materials and paint with a stain remover. Next, add a paper drywall tape to the cracks and you’ll find it’s much better to use two coats. Generally fixing repairs yourself isn’t that difficult, but if you’re having problems then it might be worth hiring a professional.