Tips to increase the water pressure in the shower

We all have a hard time waking up in the morning, either because we had a bad night full of nightmares or because our sleep was so deep that you can happily become one with the warm cocoon that is your bed. That’s why you need to find ways to shake off sleep, especially if you’re awakened by the scream of an alarm. I swear half the time when my phone alarm goes off I feel like I’m having a mini heart attack or feel like throwing it across the room.

I like to start my day with a refreshing shower to help get the cobwebs of sleep out of my head (obviously a cup of coffee afterwards helps finish the job ha ha). I need good pressure to facilitate the mobility of my muscles and it cannot be achieved without good water pressure and for this you need a good shower head to increase the water pressure.

Sometimes, even when you have the right shower head, the water pressure can be unstable or just have a little problem. Have no fear, you may not need a shower head yet. Try these tips to increase your water pressure and see if it helps solve the problem.

The shower head needs to be addressed

You should always check the efficiency of your bathroom shower head, although more often than not, if truth be told, if there is a problem, it is usually very noticeable as the water pressure is affected. The water contains many minerals that can build up on the shower head, reducing efficiency and causing interruptions in the flow of water due to the narrow path of the pipe.

  • Remove the shower head, soak it in a vinegar and water solution, and then, using an old toothbrush, brush any dirt off the surface.
  • The vinegar helps remove deposits built up in the small pores and in the main water line of the shower head.

This will improve the water pressure in the shower.

Connection of a water pressure generating pump

Low water pressure from the main supply can cause a drop in water pressure, especially if gravity is involved, which is obviously because we live on earth, not in space.

  • This can lead to a long-term problem that needs to be addressed to prevent water shortages in your bathroom and home.
  • This can be treated by installing a water pump that works against gravity and draws the water from the depths into the water pipes of the faucets by increasing the pressure.

When the water pressure is increased, the water flow is also improved.

Check the main pipe and connect it behind the shower head

Some people have flexible tubing attached behind the shower head, so be sure to check if your tubing is flexible or rigid. If it is flexible, there are chances that the pipe has flexed and this flex will cause the water pressure to restrict and cause low pressure.

You can straighten the pipe again by removing the shower head and faucet, then stretching the pipe by hand or using a small rod. However, if the pipe has been damaged, it must be replaced with a new one.

Confirm main valves or shower valves are open

Each house has several valves fixed in different positions and there is one main valve in the house through which the water supply is controlled in each part of the house, be it the kitchen or the bathroom.

  • Before calling a plumber, check the main valve to see if it is open or closed.
  • If it does not open correctly, the pressure will be low.

Apart from this valve, other valves are also fixed in the bathroom to control the water supply of the shower and other faucets, they also need to be checked.

Buy a new shower head

If the low water pressure condition persists, you should purchase a new shower head (Out with the old, in with the new) or call a plumber.


You must have the best shower heads to boost water pressure because being able to shower is a must, whether you like to shower in the morning to wake up feeling refreshed or you like to shower at night to shake off the horror of a bad day. . Power your shower!

Website design By

Add a Comment

Your email address will not be published. Required fields are marked *