The DPF Filter Cleaning Process

DPF Filter Cleaning Process

A DPF filter is an engine part that collects and filters fine particulate emissions. The residue it collects from burning fuel is disposed of at a high temperature, reducing harmful emissions. To maintain a clean DPF filter, it must be cleaned every 12-24 months. The cleaning process is relatively easy and usually only takes a half an hour. The engine manufacturer’s service department can perform this work for a fee of around $200 to $400.

The frequency of DPF filter cleaning Click Here depends on several factors, including engine use and amount of inorganic additive in lube oil. In general, on-road trucks and buses that travel 50,000 miles per year should have their filters cleaned every 12-24 months. Similarly, construction equipment should have a similar interval. If the filter is clogged with soot, the maintenance light should illuminate, indicating that it needs to be cleaned.

If you need to get a new DPF filter, it is recommended that you contact a local Dinex distribution centre. These companies will be able to assist you with the cleaning process and offer a variety of filters for your needs. Their set up is fast and efficient, and they are supported by local Dinex organizations.

The DPF Filter Cleaning Process

Regardless of the technology you choose, you’ll need to maintain your new DPF filter. A DPF can last up to six years with proper care. It is also important to clean your DPF on a regular basis to ensure a clean air filter. A clean DPF can also help the engine’s performance. When you clean your filter, your vehicle will run cleaner, reducing emissions and fuel costs.

Passive DPFs require that exhaust temperatures be between 250 and 290oC for at least three-fifth of the time. This temperature limit is easily met in most construction engines, but certain engines may not be able to meet that requirement. Passive DPFs are recommended for vehicles that are subjected to heavy loads.